iGS-110S RH/Temp Controller

Features

• Ideal controller for accurate coordination of temperature and relative humidity adjusting equipments
• For cooling, heating, humidifying, dehumidifying or cooling and dehumidifying
• External sensors housing with cable for user choosen location
• Temperature precise sensor: ±1.8°F (±1°C)
• Relative humidity precise sensor: ±3.5% RH
• Two separate electrical outlets for temperature and humidity control equipment
• Day/night detection
• Adjustable separate set points for day and night
• Adjustable operation priority and shut-off additional delay
• Operating hints: Allow you to check up temperature and relative humidity set-up performance
• 120 V, 15 A, 2 HP total load capacity
• CSA/UL compliant

• Double your cooling/heating and humidifying/dehumidifying controlled capacity by plugging a sense cord from a switcher relay iLS120-ON in an iGS-110 outlet to power another equipment up to 15 A, 120 V;

• Multiply your cooling/heating and humidifying/dehumidifying capacity by plugging a sense cord from a load switcher box like PLUG'n'GROW iLS4-240 in the iGS-110 outlet: an iLS4-240 with a 40 A circuit breaker will feed 2 x 4,000 W, 240 V heaters or 2 x 3,750 W air conditioners for about 5 Tons of refrigeration or up to 8,000 W of 240 V equipment.

Control temperature and humidity with highest priority and CO₂ enrichment

Plug a 120 V power strip in the outlet of the PLUG'n'GROW temperature and humidity controller (iGS-110) and plug the temperature or humidity equipment and the iLS120-OFF sense cord in the power strip. Plug the iLS120-OFF in a 120 V separate circuit and plug a CO₂ controller (iGS-061 or iGS-100) in the iLS120-OFF outlet and plug CO₂ enrichment device in CO₂ controller outlet.

To control 4 humidity and temperature correcting equipments, see the iGS-111